LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1425 (Engine Electrical System - Repair (N55, 2013-)) >> Electronic Switching Or Control Units >> 12 14 700 Encoding the control unit (DME)

12 14 700 Encoding the control unit (DME)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 BMW 740i, 2015 BMW 740Li xDrive, 2015 BMW 740Li, 2014 BMW 740i, and 2014 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Switch off ignition.

Connect diagnosis system.

Switch the ignition on.

Select "encoding" program.

Follow the instructions in the diagnosis system.

Adjust the following control units: