13 53 Fuel Injector Nozzles and Lines
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 BMW 740i, 2015 BMW 740Li xDrive, 2015 BMW 740Li, 2014 BMW 740i, and 2014 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FUEL INJECTOR NOZZLES AND LINES
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ High pressure pump to vacuum pump | N55/N55 Hybrid | M6 x 25 | Continental high pressure pump | 9±1 Nm |
| M6 x 25 | Bosch high pressure pump | 12±1 Nm | ||
| 2AZ Rail to cylinder head | N55/N55 Hybrid | M7 x 18 | 13±1 Nm | |
| 3AZ High-pressure line to cylinder head | N55/N55 Hybrid | M7 x 18 | 13±2 Nm | |
| 4AZ Fuel high-pressure sensor | N55/N55 Hybrid | M10 | 30-5 Nm | |
| 5AZ Fuel low-pressure sensor | N55 | M10 | Sensata fuel low-pressure sensor | 20-3 Nm |
| M10 | Bosch fuel low-pressure sensor | 30-5 Nm | ||
| 6AZ Hold-down device to cylinder head | N55/N55 Hybrid | M7 x 20 | 13±1 Nm | |
| 7AZ Feed line to high pressure pump | N55/N55 Hybrid | M14 | Coat screw connection with transmission oil. | 30±3 Nm |
| 8AZ High pressure line to rail and high pressure pump | N55/N55 Hybrid | M14 | Coat screw connection with transmission oil. | 30±3 Nm |
| 9AZ High pressure lines to rail and injection system | N55/N55 Hybrid | M12 | Coat screw connection with transmission oil. | 23±3 Nm |
| 10AZ Fuel delivery line | N55/N55 Hybrid | M8 x 17 | Replace screw. | |
| 1. Jointing torque | 5 Nm | |||
| 2. Torsion angle adjustment | 90°±15° | |||
| 11AZ EMC plate to ignition coils and injector well | N55/N55 Hybrid | M6 | 8.5 Nm | |
| 12AZ Screw plug in the EMC plate | N55/N55 Hybrid | 25 Nm | ||
| 13AZ Special tool 13 0 270 or 0 496 885 on injector shaft | N55/N55 Hybrid | M6 | 8.5 Nm |