LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1406 (Propeller Shaft - Tightening Torques (N54) -- Z4_E89) >> Propeller Shaft >> 26 11 Propeller Shaft, flexible disc

26 11 Propeller Shaft, flexible disc

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
  Type Thread Tightening specification Measure
1AZ Flexible disc to transmission output flange
ZNS screws and nuts
Shiny zinc coating
All versions
NOTE:  Replace bolts and nuts. Jointing torque and angle of rotation must be observed!
E60/E61/E63/E64/E85/E86/E87/E90/E91/E92/E93/E81/E82/E83/E84/E88/E89 M10-10.9 Jointing torque
Torque angle
20 Nm
90 °
E46/E53/E60/E61/E63/E64/E65/E85/E86/E87/E90/E91/E92/E93/E70/E71/E72/E81/E82/E83/E84/E88/E89 M12-10.9 Jointing torque
Torque angle
55 Nm
90 °