31 12 Trailing arms and struts
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRAILING ARMS AND STRUTS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Tension strut to front axle support | E89 | M12 8.8 | Replace screw and nut TIGHTEN IN NORMAL POSITION | |
| Jointing torque | 68 Nm | |||
| Angle of rotation | 90 ° | |||
| 2AZ Tension strut to swivel bearing | E89 | M14 | Replace nut | 165 Nm |
| 3AZ Wishbone to front axle support | E89 | M12 8.8 | Replace screw and nut TIGHTEN IN NORMAL POSITION | |
| Jointing torque | 68 Nm | |||
| Angle of rotation | 90 ° | |||
| 4AZ Wishbone to swivel bearing | E89 | M14 | Replace nut | 165 Nm |