31 35 Stabilizer Bar
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - STABILIZER BAR
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Retaining bar, stabilizer, to front axle carrier |
E89 |
M8 |
Replace nut |
22 Nm |
| 2AZ Stabilizer link to stabilizer |
E89 |
M10 |
Replace nut |
58 Nm |
| 3AZ Stabilizer link to spring strut |
E89 |
M10 |
Replace nut |
58 Nm |