23 11 Case and Cover
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CASE AND COVER
| |
Type |
Thread |
Tightening specification |
Measure |
| 16AZ Holder to transfer case |
265/Sport |
M6 |
|
9 Nm |
| 17AZ Retaining plates for bearings on housing |
S5D 310Z/S5D 320Z/S5D 200G/S5D 250G |
M6 |
|
10 Nm |
| 18AZ Retaining plate to housing |
S5D 320Z SMG |
M6 |
|
5.5 Nm |