23 21 Transmission shafts 260/6/MANUAL Overdrive
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION SHAFTS 260/6/MANUAL OVERDRIVE SPECIFICATION
| Side clearance (radial clearance) of: |
|
|
| Output shaft |
mm |
0... 0.09 |
| Drive shaft |
mm |
0... 0.09 |
| Countershaft |
mm |
0.1... 0.2 |
| Output pin |
|
|
| Radial runout |
max mm |
0.07 |
| Output flange |
|
|
| Radial runout |
max mm |
0.07 |
| Lateral runout |
max mm |
0.1 |