51 23 Hood/bonnet locks
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - HOOD/BONNET LOCKS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Retaining hook to engine hood/bonnet (replace microencapsulated screws) | E46/E52/E53/E60/E61/E63/E64/E65/E66/E83/E85/E86/E89 | 10 Nm | ||
| E38/E39 | 12 Nm | |||
| E36 | Hexagon screw Torx bolt | 10 Nm 12 Nm |
||
| 2AZ Lock to body (replace microencapsulated screws) | E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83 | 10 Nm | ||
| E65/E66/E85/E86 | 8 Nm | |||
| E89 | 12 Nm | |||
| 3AZ Lock to engine hood/bonnet (replace microencapsulated screws) | E36/E46/E52 | 10 Nm | ||
| E39 | 12 Nm |