65 13 188 Removing and installing/replacing mid-range speaker (in upper partition panel)

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 323

Lever out rear speaker trim (1) with special tool 00 9 323 from partition panel (2) and remove.

Fig 1: Removing Rear Speaker Trim Using Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Lever plug connection (1) out of mounting and disconnect.

Unfasten screws (2).

Feed out speaker (3) towards front and disconnect associated plug connection.

Fig 2: Identifying Speaker, Screws And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.