65 13 100 Removing and installing/replacing tweeter (in upper partition panel)

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 323

Lever out rear speaker cover (1) with special tool 00 9 323 from partition wall panel (2) and remove.

Fig 1: Removing Rear Speaker Trim Using Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lever out plug connection (1) at resistor (2) and disconnect.

Fig 2: Identifying Plug Connection And Resistor

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip tweeter (1) from rear speaker cover (2) and remove.

Fig 3: Identifying Rear Speaker Cover Tweeter

Courtesy of BMW OF NORTH AMERICA, INC.