65 77 720 Removing and installing (replacing) left/right B-pillar sensor
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Observe AIRBAG SAFETY INSTRUCTIONS .
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
- Disconnect BATTERY NEGATIVE LEAD and cover
- Remove REAR BOTTOM SIDE TRIM PANEL
Press floor lining (1) to one side.
Unfasten screws (2).
Tightening torque 65 77 3AZ .
Remove B-pillar sensor (3).
Disconnect associated plug connection.