21 21 Clutch Disc and Drive Plate
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CLUTCH DISC AND DRIVE PLATE
| Type | Thread | Work instruction | Dimension | |
|---|---|---|---|---|
| 1AZ Clutch to flywheel | E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83/E85/E86/E87/E90/E91 | M8 8.8 | Replace bolts | 25 Nm |
| E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83/E85/E86/E87/E90/E91 | M8 10.9 | Replace bolts | 34 Nm | |
| Clutch to flywheel With ZNS screws | Replace ZNS bolts. Jointing torque and angle of rotation must be observed without fail. | |||
| S85/S65 | Jointing torque Angle of rotation | 15 Nm 25 ° | ||
| N52/N53/N52K/M47T2/N45T/N54/N54T/N46T/N43/N45K/N47/M57T2/N47S/N62TU/N57/N20 | M8 10.9 | Jointing torque Angle of rotation |
15 Nm 90°±5° |