64 11 992 Removing and installing or replacing solar sensor

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Unclip trim (1) with special tool 00 9 317 from catches and remove towards top.

Fig 1: Opening Trim From Catches Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retainers (1) on speaker trim (2) must be correctly seated on associated lugs and must not be damaged.

Fig 2: Identifying Retainers On Speaker Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip cover (1).

Remove speaker trim (2).

Unclip solar sensor (3) downwards from speaker trim (2).

Installation:

Retaining lugs on cover (1) and solar sensor (3) must not be damaged.

Fig 3: Identifying Speaker Trim Cover And Solar Sensor

Courtesy of BMW OF NORTH AMERICA, INC.