11 36 Variable camshaft control
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ VANOS with sensor gear to inlet and exhaust camshafts | N54/N54T | M10x94 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Angle of rotation | 180 ° | |||
| 2AZ Non-return valve VANOS to cylinder head | N54/N54T | M14 x 1.5 | 13 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N54/N54T | M6x12 | 10 Nm |