119510 Device AM

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For mounting the radial shaft seal of the crankshaft, front.

Consisting of:

1 = 0495472 Basic body

2 = 0495473 Screw

NOTE: (screws (2 x))

3 = 0495474 Holding sleeve

NOTE: (Sliding sleeve)

4 = 0495475 Holding sleeve

NOTE: (Pressure sleeve) Can no longer be ordered separately. Only available as part of set 11 5 330 = 83 30 0 495 127.

5 = 0495476 Nut

NOTE: (Nut with bearing) Can no longer be ordered separately. Only available as part of set 31 2 120 = 83 30 0 491 909.