11 00 590 Exchange engine (N54, N54T)

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove and install ENGINE .
Mount engine on ASSEMBLY STAND .
If necessary, remove foreign bodies from turbocharger group.
Check all assemblies and convert to replacement power plant.

Remove transportation locks (1).

NOTE: Catch escaping engine oil with a suitable cloth (2).

Fig 1: Catching Engine Oil Using Cloth

Transportation locks (1) are no longer needed.

Fig 2: Identifying Transportation Locks

Modify screw plugs (1) from old power plant.

Insert screw plugs (1).

Tightening torque: 11 42 11AZ .

Secure oil cooler lines with mounting bar (2).

Fig 3: Identifying Power Plant Screw Plugs And Oil Cooler Line Mounting Bar

Assemble engine.