335040 Open-end wrench Minimum set: Mechanical tools AM: Notes
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
In conjunction with: 335070
NOTE:
Open-end spanner SW50 with retaining clip For releasing and tightening down the insert nuts for the screw connection of the propeller shaft on the rear axle final drive. Replaced by 330080 from 09/2014
Courtesy of BMW OF NORTH AMERICA, INC.