Storage Location

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Consisting of:

1= 0492360 Spindle

NOTE: (spindle) Model series: E30, E46 Replaced by 334301

Fig 1: Identifying Tool (334040)

Courtesy of BMW OF NORTH AMERICA, INC.

2= 0492361 Nut

NOTE: (Nut with bearing) Model series: E30, E46 Replaced by 334302

3= 0492362 Nut

NOTE: Series: E30, E46 Replaced by 334303

4= 0492363 Bell housing

NOTE: For gripping when removing wheel bearing, rear/model series: E30

5= 0492364 Washer

NOTE: (pull-out disc)

6= 0492365 Holding sleeve

NOTE: (guide sleeve) For installing wheel bearing, rear/model series: E30

7= 0492366 Washer

NOTE: (thrust washer) For installing wheel bearing, rear

8= 0492367 Bush

NOTE: (draw-in bushing for rear axle shaft)

9= 0492368 Holding sleeve

NOTE: (guide sleeve) For installing wheel bearings