Storage Location

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Individual

Consisting of:

1= 0492350 Bell housing

NOTE: For counter support when removing the rear wheel bearing Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).

2= 0492351 Spindle

NOTE: (spindle) Model series: E28 Replaced by 334301

3= 0492352 Washer

NOTE: (thrust washer) For removing wheel bearing, rear/model series: E28/model: 518, 528i. Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).

Fig 1: Identifying Tool (334030)

Courtesy of BMW OF NORTH AMERICA, INC.

4= 0492353 Holding sleeve

NOTE: (guide sleeve) For installing wheel bearing, rear/model series: E28/model: 518, 520i. Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).

5= 0492354 Washer

NOTE: (thrust washer) For installing wheel bearing, rear/model series: E28/model: 518, 520i Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).

6= 0492355 Holding sleeve

NOTE: (guide sleeve) For installing wheel bearing, rear/model series: E28/model: 525i, 528i. Discontinued, can only be ordered as part of complete tool 33 4 030 (0492349).

7= 0492356 Washer

NOTE: (thrust washer) For installing wheel bearing, rear/model series: E28/model: 525i, 528i Discontinued, only available via complete tool

8= 0492357 Nut

NOTE: (Nut with bearing) Model series: E28 Replaced by 334302

9= 0492358 Nut

NOTE: (Nut) replaced with 334303