333250 Tool AM

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Tool set) For pulling out rear drive flange from wheel bearing - replaced by 33 4 200.(0 492 436)

Consisting of:

1= 0492285 Spindle

NOTE: (Spindle with pressure pad)

2= 0492286 Basic unit

NOTE: Discontinuation and replaced by 33 4 200.(0 492 436)

Fig 1: Identifying Tool (333250)

Courtesy of BMW OF NORTH AMERICA, INC.