LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1352 (Rear Axle - Special Tools -- Z4_E89) >> Rear Axle >> 332203 Spindle Minimum set: Mechanical tools AM >> Notes

332203 Spindle Minimum set: Mechanical tools AM: Notes

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: (spindle M20x1.5/length 150 mm) For pressing out. For occupational safety reasons this work (wheel bearing removal) should only be carried out with the hydraulic tool 81 64 2 160 009.
scientia non olet · About LEMON Manuals