331390 Device AM

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For determining the installation size of the bevel drive pinion in the rear axle final drive

Consisting of:

1 = 0492140 Holder

NOTE: (Dial gauge holder)

2 = 0492141 Washer

NOTE: (Measuring disc)

Fig 1: Identifying Device (331390)

Courtesy of BMW OF NORTH AMERICA, INC.