23 14 ... Replacing reversing light switch

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear UNDERBODY PROTECTION

Only transmissions GS6-17DG/BG and GS6-37DG/BG

Disconnect plug connection (1) on reverse gear switch.

Remove reverse gear switch.

Tightening torque 23 14 1AZ .

NOTE: Graphic similar

Fig 1: Identifying Plug Connection On Reverse Gear Switch (GS6-17DG/BG And GS6-37DG/BG)

G04726012

Only transmission GS6-53DG/BG

Disconnect plug connection (1) on reverse gear switch.

Remove reverse gear switch.

Tightening torque 23 14 1AZ .

NOTE: Graphic similar

Fig 2: Identifying Plug Connection On Reverse Gear Switch (GS6-53DG/BG)

G05476320

Only transmission GS6-45DZ/BZ

Disconnect plug connection (1) on reverse gear switch.

Remove reverse gear switch.

Tightening torque 23 14 1AZ .

Fig 3: Identifying Plug Connection On Reverse Gear Switch (GS6-45DZ/BZ)

G09847992