232050 Puller AM

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Rillex ball bearing puller 6205) For pulling out the grooved ball bearing from the transmission countershaft and the transmission output shaft

Fig 1: Identifying Puller (232050)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 0491550 Claw

NOTE: (Claw for Rillex 6305 (8 pieces))

2 = 0491551 Holding sleeve

NOTE: (Union sleeve)

3 = 0491552 Spindle

NOTE: (Pressure spindle)