232020 Puller AM

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Rillex ball bearing puller) 7 balls - For pulling out the grooved ball bearing of the transmission drive shaft

Consisting of:

1 = 0491545 Claw

NOTE: (Claw for Rillex (7 pieces))

2 = 0491546 Holding sleeve

NOTE: (Union sleeve)

3 = 0491547 Spindle

NOTE: (Pressure spindle)

Fig 1: Identifying Puller (232020)

Courtesy of BMW OF NORTH AMERICA, INC.