232000 Puller AM

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Rillex ball-bearing extractor 6206) 9 ball bearings with steel cage - For pulling out the grooved ball bearing of the transmission drive shaft

Fig 1: Identifying Puller (232000)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 0491537 Claw

NOTE: (Claw for Rillex 6206 (9 x))

2 = 0491538 Holding sleeve

NOTE: (Union sleeve)

3 = 0491539 Spindle

NOTE: (Pressure spindle)