231400 Device AM

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For inserting the radial shaft seal into the plug-in bush of the speedometer drive pinion

Consisting of:

1 = 0491523 Shaft

NOTE: (Press-in shaft)

2 = 0491524 Shaped part

NOTE: (Shaped part)

3 = 0491525 Holding sleeve

NOTE: (Union sleeve)

Fig 1: Identifying Device (231400)

Courtesy of BMW OF NORTH AMERICA, INC.