17 11 052 Removing and installing left module carrier (N20, N52K, N54, N54T)

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Risk of scalding!
Only perform this repair work after engine has cooled down.

Necessary preliminary tasks:

Remove FAN COWL .
Remove CHARGE AIR COOLER .

Loosen bolts (1) on radiator on left and right.

Tightening torque 17 10 2AZ .

Do not unlock or detach the coolant hose (2).

Do not drain coolant.

Fig 1: Identifying Radiator Bolts And Coolant Hose

Courtesy of BMW OF NORTH AMERICA, INC.

Slide the cooler and capacitor slightly to the rear.

Lift out module carrier (1) left to the top and remove.

Fig 2: Removing Module Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

When reinstalling the module carrier (1) the correct fit of the cooler in the bracket (2) must be ensured!

Fig 3: Identifying Module Carrier And Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Reassemble the vehicle.