LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1342 (Maintenance And General Information - Special Tools (N54) -- Z4_E89) >> Maintenance And General Data >> 005010 Puller Minimum set: Mechanical tools AM >> Storage Location

Storage Location

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

A14

Consisting of:

1= 0490467  Claw

NOTE: (Extractor claw (3 pieces required)) Deletion, only available via tool set
Fig 1: Identifying Puller (005010)
G04739091Courtesy of BMW OF NORTH AMERICA, INC.

2= 0490468  Spindle

NOTE: (Guide spindle) Deletion, only available via tool set

3= 0490469  Spindle

NOTE: (Pressure spindle)

4= 0490470  Fixture

NOTE: (Holding star) For holding the extractor claws Deletion, only available via tool set

5= 0490471  Synchronizing key

scientia non olet · About LEMON Manuals