52 15 403 Removing and installing/replacing thigh support cover on front seat (Sport)

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Release thigh support (1) and move forward.

Lever welt of seat cover (2) out of thigh support.

Fig 1: Levering Out Welt From Seat Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out cover welt in marked area (1).

Disengage trim thread in marked area (2) from thigh support.

Remove cover with padding.

Fig 2: Identifying Cover Welt And Trim Thread Marked Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Pull cover (1) off padding (2).

Fig 3: Pulling Cover Off Padding

Courtesy of BMW OF NORTH AMERICA, INC.