31 00... Instructions for chassis components made of aluminium

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Due to the chemical and corrosion characteristics of aluminum, always comply with the following points when handling aluminum components:

Do not bring into contact with battery acid!
Do not clean with wire brushes made of brass or iron! Always use wire brushes with stainless steel bristles!
Do not expose to flying sparks when grinding/separating! Cover components!
Do not strike with steel welding splashes! Cover components!
Do not expose to temperatures > 80°C, even for brief periods! Temperatures in paint facilities do not have the same impact