51 13 115 Removing and installing/replacing cowl panel cover

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove BOTH WINDSCREEN WIPER ARMS

Disengage catch (1).

Fig 1: Removing Catch

Courtesy of BMW OF NORTH AMERICA, INC.

Release cable from cable holder (1).

Remove clips (2) and remove cowl panel cover.

Fig 2: Removing Cowl Panel Cover Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace defective grommets (1).

Check holder (2) for correct seating.

Fig 3: Identifying Defective Grommets With Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) must not be missing or damaged.

Retaining tabs (2) must not be damaged

Fig 4: Identifying Clips And Retaining Tabs

Courtesy of BMW OF NORTH AMERICA, INC.