51 43... Removing and installing/replacing left or right rollover protection cover bracket

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove UPPER (REAR) PARTITION PANEL

Release screws (1) and (2).

Remove split rollover protection cover bracket (3).

Fig 1: Identifying Split Rollover Protection Cover Bracket With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remount the wind deflector (1) and coat hook (2).

Fig 2: Identifying Wind Deflector And Coat Hook

Courtesy of BMW OF NORTH AMERICA, INC.