51 71... Removing and installing/replacing rear left or right wheel arch splash guard

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Release screw and nut (1).

Fig 1: Identifying Wheel Arch Splash Guard Screw And Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release cable holder (1).

Remove splash guard (2).

Fig 2: Identifying Cable Holder And Splash Guard

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Engage lug for cable (1) on stud (2).

Fig 3: Identifying Cable And Stud

Courtesy of BMW OF NORTH AMERICA, INC.