LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Body Equipment - Repair -- Z4_E89) >> Gaskets/Seals, Loose Body Components >> 51 71 360 Removing and installing/replacing seal for rear lid

51 71 360 Removing and installing/replacing seal for rear lid

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

The right side is removed in the same way as the left side.

Release screws (1).

Remove seal (2).

Fig 1: Removing Seal
G06912011Courtesy of BMW OF NORTH AMERICA, INC.

The right side is removed in the same way as the left side.

Release screw (1).

Lever off seal (2).

Lever off seal (3).

Installation: 

Fig 2: Removing Screws
G11152390Courtesy of BMW OF NORTH AMERICA, INC.