LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Body Equipment - Repair -- Z4_E89) >> Front Bumper >> 51 11... Removing and installing/replacing cover for headlight washer unit on left

51 11... Removing and installing/replacing cover for headlight washer unit on left

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Pull out spray nozzle (1) by cover (2) slightly.

IMPORTANT: When releasing cover (2), grip spray nozzle (1) firmly and then allow to slide back slowly (risk of damage).

Release cover (2) from spray nozzle (1).

Installation: 

Retaining lugs (3) must not be damaged.

Fig 1: Identifying Spray Nozzle With Cover And Lugs
G06911558Courtesy of BMW OF NORTH AMERICA, INC.