LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> Z4 28i, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1333 (Steering And Wheel Alignment - Special Tools -- Z4_E89) >> Steering And Wheel Alignment >> 323140 Tool Minimum set: Mechanical tools AM >> SI number

SI number

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

01 15 05 (200)

Consisting of:

5 = 0493765  Spindle

NOTE: Replaced by 32 3 146 
Fig 1: Identifying Tool (323140)
G09843213Courtesy of BMW OF NORTH AMERICA, INC.

5 = 0494181 Washer

NOTE: For adjusting the camber on the front axle.

3 = 0494384 Ring

NOTE: (Support ring) Replaced by 32 3 145 

6 = 0495355 Spindle

7 = 0495356 Screw

NOTE: (Knurled screw)

2 = 0493558 Ring

NOTE: (Support ring) Replaced by 32 3 145 

2 = 0493559 Holder

NOTE: Replaced by 32 3 146