34 51 Slip control system (DSC)
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SLIP CONTROL SYSTEM (DSC)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Control unit to hydraulic control unit | E89 | Initial tightening Final tightening | 2±0.5 Nm 4.3+0.5 Nm | |
| 2AZ DSC sensor to holder | E89 | 8 Nm | ||
| 3AZ Bracket, DSC sensor, to body | E89 | 8 Nm | ||
| 4AZ Pulse generator to swivel bearing/wheel carrier | E89 | 8 Nm | ||
| 5AZ Bracket to hydraulic unit | E89 | 8 Nm | ||
| 6AZ Bracket, hydraulic unit to body | E89 | 8 Nm |