331350 - Device AM

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For removing and installing outer rings of taper roller bearings

Consisting of:

1 = 0492114/ 331351 Shaped part
NOTE: (Shaped part)
2 = 0492115/ 331352 Spindle
NOTE: (Spindle, short)
4 = 0492116/ 331354 Nut
Note:
5 = 0492117/ 331355 Washer
NOTE: (Installation washer (2 pieces))
6 = 0492118/ 331356 Bridge
NOTE: (Support bridge)
7 = 0492119/ 331357 Washer
NOTE: (Thrust washer)
8 = 0492120/ 331358 Holding sleeve
NOTE: (Pressure sleeve) Can no longer be ordered separately. Only available as part of set 11 5 330 = 83 30 0 495 127.

Fig 1: Identifying Device (331350)
Courtesy of BMW OF NORTH AMERICA, INC.