Storage Location

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Consisting of:

1 = 0492097/ 331301 Connector
NOTE: (Basic body) For transmissions S5D 260Z, S5D 310Z and S5D 320Z;Discontinued, only available via complete tool
2 = 0492098/ 331302 Washer
NOTE: (Disc) Replaced by 33 1 311. (0 492 107)
3 = 0492099/ 331303 Washer
NOTE: (Disc) Replaced by 33 1 311. (0 492 107)
4 = 0492100/ 331304 Washer
NOTE: (Disc) Replaced by 33 1 311. (0 492 107)
5 = 0492101/ 331305 Synchronizing key
NOTE: (Thrust piece (old)) Discontinued, only available via complete tool

Fig 1: Identifying Extractor (331300)
Courtesy of BMW OF NORTH AMERICA, INC.
6 = 0492102/ 331306 Synchronizing key
Note:
7 = 0492103/ 331307 Synchronizing key
NOTE: Not available individually. Only via complete tool set
8 = 0492104/ 331308 Synchronizing key
Note:
9 = 0492105/ 331309 Synchronizing key
NOTE: For rear axle differential and for installing the camshaft sprocket on the crankshaft (M70) Discontinued, only available via complete tool
1 = 0492107/ 331311 Washer
NOTE: (Disc) Discontinued, only available via complete tool
2 = 0492108/ 331312 Synchronizing key
NOTE: For pulling the bearing inner race off the drive flange - Series: E36/5 Discontinued, only available via complete tool