51 12 050 Removing and installing/replacing carrier for rear bumper trim

Necessary preliminary tasks 

• Remove rear BUMPER TRIM 

Release nuts (1) on left and right.

Remove carrier (2) straight towards rear.

Tightening torque 51 12 3AZ .

Fig 1: Identifying Rear Bumper Trim Nuts And Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, remove sealing plate (1) between carrier and body (2).

Fig 2: Identifying Sealing Plate On Body

Courtesy of BMW OF NORTH AMERICA, INC.