65 11 075 Removing and installing/replacing DVD changer
NOTE:
Follow instructions for handling optical fibres
, see 61 00... NOTES ON HANDLING OPTICAL FIBERS
.
Open glovebox.
Release trim (1) at clips (2).
Installation:
Replace damaged clips (2):
Release screws (1).
Pull out DVD changer (2) and disconnect associated plug connection.
Tightening torque 65 52 5AZ , see 65 52 CD/DVD DRIVES AND SPECIAL DEVICES .
Replacement:
Release screws (1) on both sides and remove bracket (2).
Tightening torque 65 52 1AZ , see 65 52 CD/DVD DRIVES AND SPECIAL DEVICES .