64 52 A/C compressor
A/C COMPRESSOR-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Refrigerant lines to A/C compressor | E70, E71 | M8 | 21 Nm | |
| E60/N47, E61/N47, E81, E82, E87, E88, E90/N47, E91/N47, E92/N47 | M8 | 18.5 Nm | ||
| E92/S65 | M8 | 21 Nm | ||
| 2AZ Filler plug, A/C compressor | E70, E71 | 30±1 Nm | ||
| E81/N43, E82, E88 | 25 Nm | |||
| 3AZ A/C compressor to carrier | E70 | M8 x 15 | 20 Nm | |
| N52, N52K | M8 x 87 | Replace aluminum screw/bolt | ||
| Jointing torque | 10 Nm | |||
| Torque angle | 180±15 ° | |||
| N52, N52K | M8 x 52 | Replace aluminum screw/bolt | ||
| Jointing torque | 10 Nm | |||
| Torque angle | 90±15 ° | |||
| E81/N43, E88 | 23 Nm | |||
| E82/N47, E90/N47, E91/N47, E92/N47 | 19 Nm | |||
| E71/N54 | M8 x 85 | 19 Nm | ||
| E71/M57 | M8 x 85 | 19 Nm | ||
| E71/N63 | M8 x 95 | 21.4 ±3.2 Nm | ||
| E71/N63 | M8 x 55 | 19 Nm | ||
| 4AZ Bracket, pressure line, to compressor | E82/N54 | 7.6 Nm | ||
| 5AZ Bearing block, compressor, to crankcase | E70/E71 | 19 Nm |