LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 982 (Maintenance And General Information - Repair (N54)) >> Maintenance And General Data >> 61 00... Notes on handling wiring harnesses and cables >> In addition

In addition

WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Shielded cables (coaxial cables): 

IMPORTANT: Shielded cables must not  be repaired!

Fibre-optic cables: 

NOTE: Fibre-optic cables are colored differently as follows:
IMPORTANT:
  • Fibre-optic cables are permitted to show only one junction point (bridge), replace fibre-optic cables if necessary
  • Smallest permissible bending radius is 25 mm
  • Avoid effects of heat ≥ 85°

Treating cables and fibre-optic cables  . See 61 13... TREATING CABLES AND FIBRE-OPTIC CABLES .

FlexRay: 

It is possible to repair the FlexRay. In the event of damage, the cables can be joined with conventional butt connectors  . See 61 13... BUTT CONNECTOR FOR REPAIRING A PLUG CONNECTION .

NOTE:
  • The cable is a twisted cable. If possible, maintain twisted cable after repair.

Airbag cables: 

Repairing airbag cables  . See 61 00... REPAIRING AIRBAG CABLES .

Ribbon cables: 

Repairing ribbon cables  . See 61 13... REPAIRING RIBBON CABLES .