11 00 Removing and installing/replacing rear ignition coil cover (N54)
WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front ignition coil cover. See 11 00 Removing and installing/replacing ignition coil cover (N54) .
- Remove clean air pipe. See 13 71 150 REMOVING CLEAN AIR PIPE (N54) .
Release screws.
Tightening torque 11 12 7AZ. See 11 12 CYLINDER HEAD WITH COVER .
Remove rear ignition coil cover (1) towards top.