31 51 065 Replacing O-ring for Bearing Block
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 335xi, 2008 BMW 328xi, 2007 BMW 335xi, 2007 BMW 328xi, and 2006 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove bearing block. See 31 53 040 Removing and Installing/Replacing Right Output Shaft Bearing Block
Remove O-ring (1) with a suitable tool from bearing block (2).
Installation:
Insert O-ring (1) in groove and coat with front differential oil.