61 31 195 Removing and installing (replacing) front controller

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove Trim For Storage Compartment
Replacement only: Remove Knob For Controller

IMPORTANT: Risk of damage

Install knob for controller only when controller is installed.

Release screws (1).

Feed controller (2) in direction of arrow out of trim (3) and remove.

Fig 1: Identifying Screws, Controller, Trim And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out Vehicle Programming/Coding