LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 707 (General Electrical System - Repair - E92/E93) >> Plug Connection, Terminals, Fuse Box >> 61 13 Opening plug housings and removing contacts of different plug systems >> 6113... In-line plugs, 24-pin, Hybrid System MQS/MPQ >> Pin housing

Pin housing

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Press locks (1) on cap (2) upwards on both sides.

Detach cap from housing carrier (3).

NOTE: Detaching the cap releases the secondary locks of the pin contacts in the contact carriers.
Fig 1: Detaching Cap From Housing Carrier
G05478482Courtesy of BMW OF NORTH AMERICA, INC.

Pull contact carrier (1) out of housing carrier (2).

The pin contacts are pulled out of a contact carrier as described under "Socket housing".

Fig 2: Pulling Contact Carrier Out Of Housing Carrier
G05478483Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals