61 14 010 Removing and installing/replacing distribution box (on battery)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Observe Safety Instructions for handling vehicle battery.

Notes and instructions on Intelligent Battery Sensor IBS.

Necessary preliminary tasks:

Disconnect Negative Battery Cable

Release screws (1) and remove bracket (2).

Fig 1: Identifying Screws And Bracket

G04753356

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Fold up covers (3).

Unscrew nuts (2).

For tightening torque refer to 61 21 2AZ in 61 21 BATTERY WITH TERMINAL .

Fold up covers (5).

Unscrew nuts (4).

For tightening torque refer to 61 21 2AZ in 61 21 BATTERY WITH TERMINAL .

Fig 2: Identifying Plug Connection, Covers And Nuts

G04753357

Courtesy of BMW OF NORTH AMERICA, INC.

Using a screwdriver, expand locking bracket (1) at lower end and clip out.

Remove distribution box (2) towards top.

Fig 3: Identifying Distribution Box, Bracket And Removal Direction

G04753358

Courtesy of BMW OF NORTH AMERICA, INC.