LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 707 (General Electrical System - Repair - E92/E93) >> Control Units, Modules >> 61 35 201 Removing and installing/replacing LCPA module

61 35 201 Removing and installing/replacing LCPA module

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Disconnect plug connection (1).

Unlock catch (2) and remove LCPA module (3) in direction of arrow.

Fig 1: Identifying Catch, LCPA Module, Plug Connection And Removal Direction
G04753434Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Feed guide (1) of LCPA module (2) correctly into locator (3).

Fig 2: Identifying Guide, Locator And LCPA Module
G04753435Courtesy of BMW OF NORTH AMERICA, INC.